Our services, in detail

Four installation services for homes, designers and property managers, quoted after a free measure.

Program 01 · Fitted to the opening

Blinds, shades & shutters

No two openings in a house are the same width, and plenty are not square. We measure each one individually, at top, middle and bottom, decide inside or outside mount deliberately, and fit square to the window rather than to the wall that is out of true.

  • Per job
  • Homes and rentals
  • Written quote
  • Site measure

Start this program

Stage 1 · Measure

Every opening, in three places.

Stage 2 · Specification

Mount type, stack and control side.

Stage 3 · Safety

Cordless or inaccessible cords where children are present.

Stage 4 · Install

Fitted square, operation checked.

Stage 1 · Weight

What the hardware actually has to carry.

Stage 2 · Anchoring

Studs located, correct anchors chosen.

Stage 3 · Heights

Set so the fabric hangs and clears properly.

Stage 4 · Hanging

Dressed and checked level.

Program 02 · Anchored for the weight

Drapery rods & track hardware

Lined drapery is heavy, and a rod anchored only into drywall will pull out eventually. We locate studs or use the right anchors for the substrate, add intermediate brackets on long spans, and set heights so the fabric hangs level and clears the floor the way you intended.

  • Per job
  • Homes and designers
  • Written quote
  • Fabric details

Start this program

Program 03 · On the wall, staying there

Wall decor, mirrors & shelving

Drywall, plaster, block and stud walls all hold weight differently, and a heavy mirror on the wrong anchor is a genuine hazard. We find out what the wall is first, set gallery walls out on paper before a single hole, and tell you honestly when something needs a different position.

  • Per job
  • Homes and offices
  • Written quote
  • Access to the wall

Start this program

Stage 1 · Wall type

Drywall, plaster, block or stud.

Stage 2 · Layout

Set out and agreed before drilling.

Stage 3 · Anchoring

Rated for the weight, with margin.

Stage 4 · Level

Checked, and checked again.

Stage 1 · Check the parts

Before starting, not halfway.

Stage 2 · Assembly

To the instructions, in order.

Stage 3 · Anti-tip

Tall units anchored as required.

Stage 4 · Clear up

Packaging removed, floor left clean.

Program 04 · Built right, once

Furniture assembly & fixtures

Flat-pack furniture is forgiving of nothing: one panel reversed early and the whole piece is wrong by the end. We build to the instructions, anchor tall units to the wall as the manufacturer requires, and mount televisions within the bracket's stated weight on fixings the wall can take.

  • Per job
  • Homes and rentals
  • Written quote
  • Parts on site

Start this program

Got blinds sitting in boxes?

A free measure and an itemised written quote, with no obligation.